9 Upgrading Your SWiFT
9.1 Valeport SWiFT - Firmware Upgrade
This procedure describes the upgrade process for the firmware of a SWiFT.
This upgrade is required to operate with the new Valeport Connect PC and Connect iOS
applications.
It is compatible with all SWiFT CTD profilers.
Requirements
• Windows PC
• Valeport's Bootloader Utility (ver.1.0.10.3 or higher)
• SWiFT firmware .zip file
• SWiFT to be upgraded
• USB interface cable
Once upgraded to 0650735, the SWiFT and SWiFTplus will NOT be compatible with:
• Valeport DataLog x2 - replaced with Valeport Ocean for PC
• Valeport SWiFT iOS App - replaced with Valeport Ocean App for iOS
- and potentially other third-party software integrations.
Please contact Valeport for further details
9.1.1 Step 1 - Download the Required Files
Visit Valeport's dedicated Downloads site: [http://valeport.download/]
Select SWiFT from the drop-down menu
To Next Page
Loading...
