11.2.14 Antennas
• This radio transmitter IC: 8595A-NINAB1 has been approved by Industry Canada to operate
with the antenna types listed below with the maximum permissible gain and required antenna
impedance for each antenna type indicated.
For each antenna, the “Approvals” field defines in which region or market the antenna is pre-
approved for use with the NINA-B1 series modules. Definitions of the «Approvals» field are:
• FCC – The antenna is approved for use in countries that accept the FCC radio approvals,
primarily the US.
• IC – The antenna is approved for use in countries that accept the IC radio approvals,
primarily Canada.
• RED – The antenna is approved for use in countries that accept the Radio Equipment
Directive, primarily the European countries.
• MIC – The antenna is approved for use in the Japanese market.
• NCC – The antenna is approved for use in the Taiwanese market.
• KCC – The antenna is approved for use in the Korean market.
• ANATEL – The antenna is approved for use in the Brazilian market.
• ACMA – The antenna is approved for use in the Australian and New Zealand markets.
• ICASA – The antenna is approved for use in the South African market.
Internal Antenna
FCC, IC, RED, MIC, NCC, KCC, ANATEL,
ACMA and ICASA
The NINA-B1 series modules comply with the "Directive 2011/65/EU of the European
Parliament and the Council on the Restriction of Use of certain Hazardous
Substances in Electrical and Electronic Equipment" (RoHS)
To Next Page
Loading...
