3. APPLIANCE DATA, EFFICIENCY AND NO
x
3.1 General information.
Under no circumstances is this fire to be converted to LPG. An LPG conversion kit
does not exist for this gas fire.
The appliance information label is located on a ‘swing out’ plate at the base of the
fire. On fires that are already installed this can be seen by removing the bottom front
cover of the fascia.
Page 9
© Baxi Heating U.K. Limited 2010.
INSTALLER GUIDE
Gas Natural (G20)
Inlet Pressure 20mbar
Input - Max. (Gross) 3.9kW (13,307 Btu/h)
Input - Min. (Gross) 2.3kW (7,848 Btu/h)
Input - Max. (Net) 3.51kW (11,976 Btu/h)
Input - Min. (Net) 2.07kW (7,062 Btu/h)
Inlet Test Pressure (Cold) 20.0 ± 1.0mbar (8.0 ± 0.4in w.g.)
Gas Connection 8mm pipe
Burner Injector Cat 82 - 280
Pilot & Atmosphere Sensing Device Copreci Ref. O.D.S 21100/234
Ignition Electronic (Alkaline 9V PP3 Battery)
Aeration See section 20.1
Figure 1.
To Next Page
Loading...
