Valtir.com 40 Revision D November 2022
Inspect Shipping
Check all received parts against the shipping list supplied before QuadGuard
®
deployment. Make
sure all parts have been received.
Caution: The Drawing Package supplied with the QuadGuard
®
must be used
with these instructions for proper assembly and should take precedence over these
general instructions.
Determine Backup and Transition Type
The QuadGuard
®
is available with a Tension Strut Backup or a Concrete Backup. See Figures 40
and 41, along with the Backup assembly drawing, to determine which type of Backup is being
deployed.
A Transition Panel or Side Panel must be used on each side of the Backup. A Side Panel is not
needed when a Transition Panel is used. Several types of transitions are available for use with
the QuadGuard
®
. See Figures 42 through 46 and the drawing package to determine which types
of panels to attach.
Figure 40
Tension Strut Backup
Figure 41
Concrete Backup
To Next Page
Loading...
