134 mm
272 mm
6---7 mm
12
3
4
4
5 1
2
3
272 mm
266 mm
134 mm
6 --- 7 m m
45
Model Code Page
21. Engine
1. 1. 1994
6000--8750
211 3
1. 9. 1992
Camshaft oversize bearing bushings for 420---engines.
Numbering begins from the front end of the engine.
Camshaft oversize bearing bushings for 620/634 engines.
Numbering begins from the front end of the engine.
The camshaft rear end plug is replaced with plug 8363 24391
and o---ring 6146 05125 after machining.
Order no Hole diameter
1. 8363 24661 56,02...56,05
2. 8368 52460 55,42...55,45
3. 8368 52460 55,42...55,45
4. 8368 52461 55,64...55,67
Order no Hole diameter
1. 8363 24661 56,02...56,05
2. 8368 52466 55,62...55,65
3. 8368 52460 55,42...55,45
4. 8368 52466 55,62...55,65
5. 8368 52467 55,84...55,87
F. Fitting plug at camshaft re ar end
1. Clean the seat for the plug.
2. Apply sealing compound to the contact surface of the plug
3. Drive in the plug with fitting drift 9025 87400.
Note! Do not drive in the plug too far because it will affect the
camshaft end float.
https://www.truck-manuals.net/
To Next Page
Loading...
Need help?
General
