Vanderbilt ACTpro 1500e - Typical Wiring of Actpro 1520 E;1500 E; Wiring Exit Readers

2.4 Typical wiring of ACTpro 1520e/1500e
Label Description Label Description
A Doorcontact,normallyclosed F ACTreaderwirecolourcoding
B Pushtoexit,normallyopen G
Ethernet:RJ45
Note:AllIPdevicemusthaveavalidIPAddress.
C Doornetworks H
Important:Placevaristoracrossalllockterminals.
Note:DiagramshowsnormallyenergisedMagnetic
Lock.
D Controllernetwork J Breakglassunit(doublepole)
E
Breakglassmonitoring,normally
closed
 
2.4.1 Wiring exit readers
Forclockanddatareaders,wireexitreadersinparallelbutleavethesenselineunconnected.
ForWiegandreaders,wiretheDATA0oftheexitreadertoSENSEontheACTpro1520e.
Maxlength:100mwith12VDC
Cable:8corescreenedBelden9504orequivalent
ACTpro 1520e/1500e Door Controller – Installation and Operating Instructions Installation
© Vanderbilt 2018 EN– 9
A-100440
01.02.2018