Vanderbilt VR50M-MF - User Manual

Mullion Reader
User Manual
Document ID: A-100410
Edition date: 21.06.2018

Summary

2 Technical data

3 Safety regulations

5 Mounting and connecting

5.1 Mounting a reader

Explains how to attach the reader base to a flat surface for a secure fit.

5.2 Mounting a reader with cables fed from the side

Describes the procedure for mounting the reader when cables enter from the side.

5.3 Connecting the cables

Guides on how to connect the reader's cables using jumpers and terminal blocks.

8 Default settings

9 Connecting the card reader to SiPass integrated

9.1 Connecting the card reader to SiPass integrated in OSDP mode

Wiring instructions for OSDP mode connection to SiPass integrated.

9.2 Setting OSDP address for the card reader

9.3 Connecting the card reader to SiPass integrated in Wiegand mode

10 Connecting the card reader to ACT

10.1 Connecting the card reader to ACT in OSDP mode

10.2 Setting the OSDP address for the card reader

10.3 Connecting the card reader to ACT in Wiegand mode

11 Connecting the card reader to SPC

Vanderbilt VR50M-MF Specifications