Vanderbilt VR50M-MF - 9 Connecting the card reader to SiPass integrated; 9.1 Connecting the card reader to SiPass integrated in OSDP mode

9 Connecting the card reader to SiPass integrated
9.1 Connecting the card reader to SiPass integrated in OSDP mode
A SiPass integrated RIM (DRI/ERI)
B Power and A, B (OSDP)
C Reader 1 (Mullion reader with keypad)
D Reader 2 (Mullion reader)
E Reader 3 (VR40S-MF Mifare Reader with keypad and display).
The connection between a card reader and a Reader Interface Module (RIM) is as follows:
RIM (DRI/ERI) VRxx-MF
12 V

+
0V

-
Tx/+

A
Rx/-

B
SiPass integrated can support both the VR and NGCR readers on the same OSDP bus.
© Vanderbilt 2018 23
A-100410
21.06.2018