Table of Contents
1 Introduction 4
2 Technical data 5
3 Safety regulations 7
3.1 Standards and guidelines 7
4 Reader components and package contents 8
4.1 Reader components 8
4.2 Package contents 9
5 Mounting and connecting 10
5.1 Mounting a reader 10
5.2 Mounting a reader with cables fed from the side 11
5.3 Connecting the cables 13
5.3.1 Setting the jumpers 13
5.3.2 Connecting the reader in OSDP mode 14
5.3.3 Connecting the reader in Wiegand mode 15
6 Closing the reader 17
7 Disassembling the reader 18
8 Default settings 20
8.1 3CT Tool 21
8.2 Setting burst mode using the keypad 22
9 Connecting the card reader to SiPass integrated 23
9.1 Connecting the card reader to SiPass integrated in OSDP mode 23
9.2 Setting OSDP address for the card reader 24
9.3 Connecting the card reader to SiPass integrated in Wiegand mode 24
10 Connecting the card reader to ACT 25
10.1 Connecting the card reader to ACT in OSDP mode 25
10.2 Setting the OSDP address for the card reader 26
10.3 Connecting the card reader to ACT in Wiegand mode 27
11 Connecting the card reader to SPC 28
12 Disposal 29
To Next Page
Loading...
Need help?
General
