8
90°
3.1 Rotate the stem 90° clockwise so it’s in
line with the front fender.
4.1 Take the bike out of the front wheel
stand and place it on the oor.
3. Adjust the stem
4. Wheel position
Note
See page 28 to learn how to
adjust the handlebar.
3.2 Check the bolts’ position – the top
should enter from the left, and the
bottom from the right. Tighten the two
bolts using Allen key #5, making sure
the stem stays in line with the front
wheel. Do not over-tighten the bolts,
just turn until they are secure.
Allen key #5
Place on the oor
To Next Page
Loading...
