18
2.1 Before you ride your VanMoof, you’ll
have to get it out of shipping mode.
To do this, insert the charging plug or
press the on/o button (see page 24 for
charging information).
1.1 Using the included pump, inate
your tires to 3.0- 3. 5 Bar / 50 Psi (the
recommended pressure is printed on
the tires, if you need a reminder. The
maximum tire pressure is 4.5 Bar / 65
Psi ).
2. Activating your bike
2.2 Open the VanMoof App to create
an account and register your bike (if you
haven’t already). The app will connect
automatically, and guide you through
setting your personal unlock code (see
page 20) If connection fails, check
if your phone is near the bike and Blue-
tooth is enabled.
1. Inate your tires
Charger Power button
To Next Page
Loading...
