VANMOOF X3 - Using Your Unlock Code

21
THE FIRST RIDE
1 5
9
7. Using your unlock code
Beep Beep
7.1 Let’s say your code is 1-5-9. Here’s
what to do:
A. Hold the left handlebar button – this
will switch to the backup unlock mode.
B. Enter the rst digit of your code – in the
example above that means pushing
the button 1 time. You’ll hear a beep as
conrmation.
C. Enter the second digit of your code –
pushing the button another 5 times.
You’ll hear a beep again.
D. Enter the third digit of your code –
pushing the button 9 times. You’ll hear
a nal beep.
E. After the last conrmation, move your
bike forwards or backwards within 5
seconds – now you’re ready to ride.
Forward