ProStar 430 Autosampler Control Manual - 23 - 03-914947-33:2
complemented with liquid from the wash solvent bottle to total
the programmed dispense volume. Speed and Height can be
programmed.
NOTE: Refer to the Appendix for more details about the Syringe Speed values
depending of the type of syringe.
Wait to program a pause (from 0 to 599.99 minutes). During the
pause, the needle will move to home position (if the previous
step is an Aspirate from or a Dispense to action). To keep the
needle in the same position, an Aspirate from or a Dispense to
step of 0 µL must be programmed at the desired position.
Repeat the X entered last Step(s). The Count parameter
defines how many times the Step(s) must be repeated.
Rinse+Wash a programmed needle volume (Amount). Buffer is
rinse to waste.
To Next Page
Loading...
