ProStar 430 Autosampler Control Manual - 36 - 03-914947-33:2
Plate feeder Window
This tab is active if the plate feeder option has been previously
configured in the Galaxie Configuration Manager.
Plate Feeder parameter group:
Click on the
button to reset the lifts.
Click on the
button to move the left lift up to
the top to more easily take plates out of the lift.
Click on the
button to move the left lift to
standard operating position again.
Click on the
button to move the right lift up to
the top to more easily take plates out of the lift.
Click on the
button to move the right lift to
standard operating position again.
To Next Page
Loading...
