Page 33
Figure 11 Three point ramping curve
NOTE:
Ramping is interrupted when days fail to respect a
chronological order. However, this characteristic may
be useful to users unwilling to use the 5 “preset”
ramping points.
The following illustration shows how users can give
faulty values to the last 2 points to obtain a 3 point
curve.
3.2.4 Probes
The following instructions show how to read the current
temperature of 1 or more rooms as well as the recorded
highs and lows for inside and outside temperatures.
F1:
The probes’ average value is displayed and does not
flash. The + and - buttons serve no purposes. If the gap
between the recorded values is too great, the Err
message will be displayed.
To Next Page
Loading...