Page 6
IC-610 - Intelligent Control
• Time clock for feed & water consumption, lighting,
ramping ...
Enclosure:
- Easy access
Hinged covers
High and low voltage components
separated
Water-resistant
1.1.1 Compatible modules
The Intelligent Control is considered a “master control
unit” and can control and monitor up to 8 of the following
modules (1 or 2 per output):
VSM-2 Variable Speed Module (max. 4), 2 variable
stages, 6 Amp. nominal each (0.1 A - 6 A)
CM10-2 Control Module, 2 single speed stages, 10
Amp. each (0.3 - 10 A)
CM3-2 Control Module, 2 on/off stages 4 Amp. each
(5 mA - 4 A)
CIM-1 Curtain, Air Inlet or 2 speed motors module
(5 mA - 4 A)
CIP-1 Curtain and Air Inlet Positioner (5 mA - 3A)
IC-610SL This slave unit specifically designed for the
IC-610 has 10 output leds. Used in
conjunction with its master, the SL gives the
operator 6 more inputs, 4 communication
ports and 6 internal relays. The IC-610SL
module basically doubles the number of
outputs.
Figure 1 IC-610SL Faceplate