VAT 150 Series - Tightening torque specifications; Required tools

Series 150 MAINTENANCE
773485EA
Edition
2014
-
11
-
03
17
/
27
6.2 Tightening torque specifications
Item-No. Description Tightening torque [Nm]
2 Bonnet screw 15.0
Item-No. Description Tightening torque [Nm]
6
Gate fixation
screw
20.0
Table 6-1
6.3 Required tools
• Open-end wrench
• Torque wrench according «Table 6-1»
• Cleanroom wiper soaked with alcohol (2% methyl ethyl ketone)
• O-Ring removal tool; see «Table 11-1» on page 27
Figure 6-1