Vatech EzSensor Classic User Manual

49
Step 3
Click the [Ready] button after positioning the patient. If the IO Sensor equipment is
properly connected, the image acquisition mode will be initiated.
Step 4
Using the exposure switch, shoot the x-ray and the image will be acquired.
The process of acquiring the image is complete.
By double clicking the workspace from the ACQUISITION tab, EzDent-i
will be ready for image acquisition. The [Ready] button provides the same
function.
Double Click

Vatech EzSensor Classic Specifications

General

Brand	Vatech
Model	EzSensor Classic
Category	Medical Equipment
Language	English