Vatech PHT-60CFO

PaX-i3D Green (PHT-60CFO) User Manual
116
8 Acquiring CT Images
8.2
Positioning the Patient
Follow the procedure outlined below to properly position the patient for CT
scanning.
Before Positioning the Patient
■
Ask the patient to remove all jewelry and metallic objects, such as earrings,
hair pins, spectacles, dentures, and orthodontic appliances. These items
can cause shadow images which could obstruct diagnosis.
■
It is strongly recommended that the patient wear a lead apron to protect
against scatter radiation.
■
Adjust the column height to the patient’s height using the up/down button or
switch (optional).
Column Up Button
Column Down Button
Column up/down
switch (optional)
NOTE
- In general, imaging is performed with the patient in
an upright position. However, a stool may be used for
imaging patients with special circumstances. If a stool is
used, ensure that the beams and movement of unit are
not obstructed by the stool
- Correct positioning is an important factor in capturing
the best possible image. Proper positioning will reduce
the appearance of the cervical spine in the image.
WA
RNIN
G
Be careful not to project the laser beams directly into the
patient’s eyes as this could severely damage the patient’s
vision.
[PI3DG_130U_44A_en]User Guide.indd 116 2016-05-24 오후 4:19:10