Need help?Do you have a question about the Vaya BUDDY-2 and is the answer not in the manual?
Explains the meaning of various symbols used in the manual.
Crucial preliminary steps before operating the e-bike for the first time.
Critical safety guidelines and warnings for using the e-bike.
Important precautions and warnings for safe operation and maintenance.
Key considerations and advice for using the e-bike.
Step-by-step guide for correctly installing the front wheel.
Instructions for setting up the bicycle seat and post.
Guide to mounting and adjusting the handlebars for optimal use.
Instructions for installing the left and right pedals correctly.
How to adjust the frame's folding mechanism for secure operation.
Details on securing the frame folding mechanism with the safety lock.
Step-by-step instructions on how to fold the e-bike for storage or transport.
Guide on how to properly unfold the e-bike after it has been folded.
Navigation and options within the e-bike's settings menu.
Customizing display options like units, brightness, and view modes.
Configuring advanced parameters like PAS, speed limits, and sensitivity.
How the pedal assist system provides motor support while pedaling.
Using the bike as a normal bicycle with display information.
Engaging the low-speed walk assist for pushing the bike.
Using the hand throttle for propulsion up to 6 km/h.
Adjusting seat height, angle, and stem height for comfort.
Detailed instructions for adjusting the seat's position and angle.
Adjusting the stem height to the user's preferred position.
Identifying the front and rear hand brakes and their function.
Ensuring all fasteners are properly tightened for safety.
Operating the integrated lock for securing and powering the bike.
Procedures for removing the e-bike battery.
Procedures for installing the e-bike battery.
Technical details and characteristics of the rechargeable Li-ion battery pack.
Guidelines for proper battery storage, especially in cold temperatures.
Step-by-step instructions for safely charging the e-bike battery.
Best practices for charging the battery to ensure safety and longevity.
Technical details of the standard 48V charger.
Routine checks for frame, tyres, brakes, and fasteners to ensure safety.
Troubleshooting common brake issues like noise.
Troubleshooting steps when the brakes are not functioning correctly.
Checking wheels for wobbles and potential need for repair.
Checking wheel bearings for wear and servicing needs.
Step-by-step guide for replacing a punctured inner tube.
Information on how to replace worn brake pads.
Instructions for environmentally responsible disposal of the e-bike and battery.
To Next Page
General
