8
ELCARE NORDIC: service.vaya@elcare.com
Seat assembly
Loosen the seat holder. Insert the seat post into the bike and set it to the desired height.
Lock the seat holder.
WARNING: Be careful not to move the seat post over or under the maximum/minimum
settings. See seat post markings. |||||||||||||
Handlebar assembly
Use the 2 included screws to mount the handlebar. Adjust the handlebar angle to optimal
angle before fully tightening the 2 screws. Check that the screws are securely mounted.
See the section “Recommended torques” for correct tightening of the screws.
WARNING: Secure the handlebar screws correctly before using the bike for the rst time.
To Next Page
Loading...
