17
ELCARE NORDIC: service.vaya@elcare.com
Seat post: After tightening the screw, press the seat down to check if it is tight enough
and attempt to twist the saddle from side to side to ensure it will not move when riding.
Stem: After tightening the screw, press the handlebar down to check if it is tight enough.
Suspension adjustment
Turn the knob on right side of the front suspension, to activate/deactivate the suspension.
Precautions before driving
Check that the components of the e-bike are rmly installed and not damaged.
Check that the brakes work correctly.
Check that the tyres are in good condition and inated.
Check that the handlebar is securely fastened. If there are loose parts, please tighten them.
Check that all locks are securely tightened, and all secondary locking mechanisms are secured.
WARNING: Perform a brake check every time before using the bike. Incorrectly installed,
worn, damaged, or dirty brakes can greatly affect the brake distance and result in serious
personal injuries and even death.
Lock
There is a lock located under the frame. It can be turned into 3 different settings. Use the
included keys.
Turn on bike: Turn the key all the way clockwise. The display can be powered on. The key
cannot be removed.
Remove battery: Press the key in while turning it counter-clockwise. The battery can now
be removed. Remember to take out the key before attempting to removing the battery.
Lock bike: Turn the key to the centre position. The bike is now locked and the bike cannot
be powered on. The key can be removed.
To Next Page
Loading...
