Vaya BUDDY-2 - ADJUSTING THE REAR DERAILLEUR

22
ELCARE NORDIC: service.vaya@elcare.com
Adjusting the rear derailleur
Step 1:
When lifting the rear of the bike and turning the pedals by hand, use the gear change to
select the lowest gear.
Use a suitable screwdriver to turn the screw marked “L” (low gear) to adjust the rear
derailleur until it is vertically aligned below the lowest gear. See the photo above.
Step 2:
When lifting the rear of the bike and turning the pedals by hand, use the gear change to
select the highest gear.
Use a suitable screwdriver to turn the screw marked “H” (high gear) to adjust the rear
derailleur until it is vertically aligned below the highest gear. See the photo above.