EasyManua.ls Logo

vc999 K6 - User Manual

vc999 K6
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operating Manual
Art. no. 519.340
K6/K6N
Vacuum Packaging Machine
Inauen Maschinen AG Tel. ++41 (0) 71 35 35 900
Melonenstrasse 2 Fax ++41 (0) 71 35 35 901
CH-9100 Herisau / Switzerland E-mail vc999.ch@vc999.com

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the vc999 K6 and is the answer not in the manual?

Summary

Safety, warranty

2.1 General safety instructions

Provides essential safety instructions for operating, installing, and servicing the machine.

2.1.1 Use as prescribed

Details the intended use of the K6 and K6N vacuum packaging machines.

2.1.2 Processing materials

Information on suitable vacuum bags, products, and inert gases for packaging.

2.1.3 Requirements for operators

Specifies qualifications and responsibilities for machine operators.

Description of the machine

3.1 Principle of how it works

Explains the basic process of sealing bags under vacuum or inert gas.

3.2 Technical data

Lists technical specifications, available accessories, and dimensions.

3.2.3 Vacuum technology

Details the vacuum pump specifications and vacuum generation methods.

Packaging and transport

4.2 Transportation of the machine

Important precautions for transporting the machine, especially regarding orientation.

Setting up the machine

5.1 Criteria for the installation site

Requirements for the room where the machine will be installed.

Interface definition

Installation of the machine

7.1 Electrical installation

Procedure for connecting the machine to the mains power supply.

7.2 Inert gas installation

Step-by-step guide for connecting the inert gas supply to the K6N.

7.3 Pouring in oil

Instructions for checking and filling the vacuum pump oil.

Start-up

8.1 Initial start-up

Specifies that initial start-up must be done by service personnel and includes warnings.

8.1.1 Installation check

Checklist for verifying correct installation before switching on.

8.1.2 Switching on the machine

Procedure for turning on the machine and starting the vacuum pump.

Operation

9.1 General instructions

Important general rules and warnings for operating the machine.

9.3 Preparation

Steps for preparing the product and machine before packaging.

9.4 Controls

Overview of the machine's control panel and its functions.

9.4.1 Control panel

Detailed description of each button and display on the control panel.

9.4.2 Switching on

Procedure to turn on the machine and activate the vacuum pump.

9.4.3 Inserting bags

How to correctly place vacuum bags in the chamber for sealing.

9.4.4 Starting the packaging cycle

How to initiate the vacuum packaging cycle after placing bags.

Programming

9.5.2 Meaning of the parameters

Explains the various parameters used in packaging programs.

9.5.2.1 Vacuuming to evaporation point (A)

Details the "Evaporation point" vacuuming method and its sensitivity setting.

Switching off the machine

Faults

11.1 Displayed faults

Table detailing error messages, causes, and rectification for displayed faults.

11.2 Other faults

Table detailing non-displayed faults, causes, and rectification.

Process oils

Maintenance

13.3 Maintenance and servicing

General maintenance recommendations and service intervals.

13.3.5 Maintenance of the vacuum pump

General guidance and recommendations for vacuum pump maintenance.

Repairs

Diagrams

vc999 K6 Specifications

General IconGeneral
Product TypeElectric Kettle
Capacity1.7 Liters
MaterialStainless Steel
Auto Shut-offYes
Boil Dry ProtectionYes
CordlessYes
360 Degree Swivel BaseYes
Water Level IndicatorYes
Voltage220-240 Volts

Related product manuals