VDO Cyclecomputing M6.1 - Setting the wheel size; Setting the total values

ENGLISH
4746
BIKETPC
SET
ALTI
BIKETPC
SET
ALTI
Setting the wheel size Setting the total values
Enter the wheel circum-
ference by selecting
a tyre size from the
tyre list.
Enter the wheel circum-
ference in mm (kmh) or
inches (mph).
Manually enter the wheel circumference or select from the tyre list.
Information on tyre sizes can also be found on page 172–173.
– Open the settings menu:
Press and hold the SET button until the
settings menu opens
– Scroll from Logging to Settings:
Press the BIKE or TPC button
– Open the settings:
press the SET button
– Scroll to wheel size in the menu:
Press the BIKE or TPC button
– Start the setting:
Press the SET button
– Press the BIKE or TPC button to
select “Manual Set” or the tyre list
– Confirm your selection:
Press the SET button
– Close the settings menu/back to the
function menu:
Press and hold the SET button
– Open the settings menu:
Press and hold the SET button until the
settings menu opens
– Scroll from Logging to Settings:
Press the BIKE or TPC button
– Open the settings menu: press the
SET button
– Scroll to Total Values in the menu:
Press the BIKE or TPC button
– Open the settings: press the SET button
– Scroll to the total values in the
settings: Press the BIKE or TPC button
– Open the selected setting:
Press the SET button
– Change the setting: Press the BIKE or
TPC button
– Confirm your selection: Press the
SET button
– Close the settings menu/back to the
function menu: press and hold the
SET button
ATTENTION: all data is retained when the
battery is replaced.