VDO BVDR 2.0 - Display and Operating Elements

Issue 08/2023 © Continental Automotive 85
1.2 Display and operating elements for BVDR
1
Display LCD
Interface indicating information and functionality..
2
Calibration and programming interface
Used for calibration and programming the BVDR .
3
Printer
Thermal printer for generating the diagram tape with the running data of
the last 24 hours.
4
NFC receiver
Performs, by approximation, the reading of identification cards
5
Navigation Buttons
Allows access to the tachograph menu functions
6
Tachograph opening seal
Plastic security seal for access to the register unit
7
Security seal of BVDR
Plastic seal of access to the register unit. It should be broken only by a
VDO station.