DLKPro Inspection Key • Operating Instructions – Edition 03/2012 22
6 The screen – the first data check
Information about the selected company card:
Activities carried out
Information about the selected control card:
Activities carried out
Information about the selected workshop card:
Programmed parameters
Mass memory download
Driver card download
Company ‘lock-in’ (to the digital tachograph VU)
by inserting the company card; this procedure is
only carried out if the company is not yet ‘locked
in’.
Company ‘lock-out’ from the digital tachograph
when removing the company card
Mass memory download
Driver card download
Printout from the digital tachograph
Data viewed in the display of the digital tachograph
W Characteristic coefficient (imp/km) programmed
into the digital tachograph
K Correction value programmed into the digital
tachograph
L Tyre circumference programmed into the digital
tachograph
Tyre size programmed into the digital tachograph
To Next Page
Loading...
