Page
2
Key Functions
0
,
2
1
.
•
CHANGE
ENTER
BACKUP
A B C
Q Z
PRINT
PAPER
FEED
TANK
SENSOR
STEP
ALARM
TEST
FUNC-
TION
MODE
Press to silence the alarm.
This will not reset the display
or disable any alarm functions.
Press to select the system mode:
Operating Mode, Setup Mode,
Diagnostic Mode.
Press to select the various
Functions within each Mode.
Press to change to a
different option than
currently displayed.
Select a character by successive
presses of the key. Press once for "A".
Press again for "B", again for "C"
and a fourth time to enter a "2".
The period (.) is on key "1".
The decimal point (•) is on
the Right Arrow key ( ).
The zero key has a space ( ), a
hyphen ( ) and the comma ( ).
The Arrow keys are used to move
the cursor left and right without
changing the displayed character.
Press to select an option.
Also to start leak tests.
Used to move back
through Steps, Functions
and Modes.
Press to generate the
various reports.
Press to advance the
paper through the printer.
Press to move to the next
procedure within each function.
Press to change to the next
tank or sensor
,
To Next Page
Loading...
