Veeder-Root TLS2 - Page 110

To Next Page

To Previous Page

Serial Interface Manual

• TLS2 Monitoring Systems

Part No. 577013-767, Revision H 107

Function Code: 641 Version 5

Function Type: Set Density Code

Command Format: Inquire:

Display: <SOH>S641TTSSSSSSSSSSSSSS <SOH>I641TT

Computer: <SOH>s641TTSSSSSSSSSSSSSS <SOH>i641TT

Notes:

1. SSSSSSSSSSSSSS - Density Code (This entry should either be exactly 14

characters or empty))

2. - The density code should always start with either ‘A’ or ’B’.

The remaining 13 characters should be decimal numbers (0-9)

only and no ASCII character is allowed.

3. - If an empty string is entered for set operation (S641TT)

then density code will be set to default values.

Typical Response Message, Display Format:

<SOH>

I641TT

AUG 15, 2010 3:11 PM

DENSITY FLOAT CODE

TANK CODE

1 B7053686719512

3 A7058696729713

4 B7056772719214

<ETX>

Typical Response Message, Computer Format:

<SOH>i641TTYYMMDDHHmmNNSSSSSSSSSSSSSS…&&CCCC<ETX>

Notes:

1. YYMMDDHHmm - Current Date and Time

2. TT - Tank Number (Decimal, 00=all)

3. NN - Number of characters to follow

4. SSSSSSSSSSSSSS - Density Code

5. && - Data Termination Flag

6. CCCC - Message Checksum

Other manuals for Veeder-Root TLS2