Veeder-Root TLS2 - Communications Setup

Serial Interface Manual
• TLS2 Monitoring Systems
Part No. 577013-767, Revision H 60
7.3.2 COMMUNICATIONS SETUP
Function Code:
523 Version 1
Function Type: Set Receiver Telephone Number
Command Format: Inquire:
Display: <SOH>S523RRaaaaaaaaaaaaaaaaaaaa <SOH>I523RR
Computer: <SOH>s523RRaaaaaaaaaaaaaaaaaaaa <SOH>i523RR
Typical Response Message, Display Format:
<SOH>
I52301
22-05-01 15:02
RECEIVER PHONE NUMBER
RCVR PHONE NUMBER
1 860-555-2866
<ETX>
Typical Response Message, Computer Format:
<SOH>i523RRYYMMDDHHmmRRaaaaaaaaaaaaaaaaaaaa
RRaaaaaaaaaaaaaaaaaaaa&&CCCC<ETX>
Notes:
1. YYMMDDHHmm - Current Date and Time
2. RR - Receiver Number (Decimal, 01 only)
3. a - Phone Number (20 ASCII characters from 20 Hex - 7E Hex)
4. && - Data Termination Flag
5. CCCC - Message Checksum