Serial Interface Manual
• TLS2 Monitoring Systems
Part No. 577013-767, Revision H 156
8.0 FUNCTION CODE SUMMARY
CONTROL FUNCTIONS (7.1)
Code Ver Function
001 1 System Reset
003 1 Remote Alarm Reset
010 1 Computer Mode Autodial Hang-up
052 1 Start In-Tank Leak Detect Test
053 1 Stop In-Tank Leak Detect Test
09E 5 Password Log In
09F 5 Password Log Out
OPERATIONAL REPORTS (7.2)
SYSTEM REPORTS (7.2.1)
Code Ver Function
101 1 System Status Report
103 4 System Identification Report
111 1 Priority Alarm History Report
112 1 Non-Priority Alarm History Report
113 1 Active Alarm Report
114 1 Cleared Alarm Report
117 1 Priority Alarm History Report II
118 1 Non-Priority Alarm History Report II
IN-TANK REPORTS (7.2.2)
Code Ver Function
201 1 In-Tank Inventory Report
202 1 In-Tank Delivery Report
203 1 In-Tank Leak Detect Report
204 1 In-Tank Shift Inventory Report
205 1 In-Tank Status Report
206 1 In-Tank Alarm History Report
207 1 In-Tank Leak Test History Report
208 1 In-Tank Leak Test Results Report
209 1 In-Tank Enhanced Leak Detect Report
20C 1 In-Tank Most Recent Delivery Report
20D 1 In-Tank Stick Height Report
214 5 In-Tank Mass / Density Inventory Report
215 5 In-Tank Mass / Density Delivery Report
To Next Page
Loading...
Need help?
General
