Serial Interface Manual
• TLS2 Monitoring Systems
Part No. 577013-767, Revision H 15
7.2 OPERATIONAL REPORTS
7.2.1 SYSTEM REPORTS
Function Code:
101 Version 1
Function Type: System Status Report
Command Format:
Display: <SOH>I10100
Computer: <SOH>i10100
Notes:
1. This command will report all active OR unacknowledged alarms
and warnings up to the limit of 25 alarms in display format,
and 150 alarms in computer format
Typical Response Message, Display Format:
<SOH>
I10100
22-05-01 14:55
STATION HEADER 1....
STATION HEADER 2....
STATION HEADER 3....
STATION HEADER 4....
SYSTEM STATUS REPORT
ALL FUNCTIONS NORMAL
<ETX>
To Next Page
Need help?
General
