Serial Interface Manual
• TLS2 Monitoring Systems
Part No. 577013-767, Revision H 154
7.5 MISCELLANEOUS
7.5.1 MISCELLANEOUS
Function Code:
D01 Version 5
Function Type: Push Site ID
Command Format:
Display: This command is only sent out by the TLS2P
Computer:
Typical Response Message, Display Format:
Computer format only
Typical Response Message, Computer Format:
<SOH>iD0100YYMMDDHHmmDDDDDD000000&&CCCC<ETX>
Notes:
1. YYMMDDHHmm - Current Date and Time
2. DDDDDD - Site ID (Decimal)
3. 000000 - 6 Zeros
4. && - Data Termination Flag
5. CCCC - Message checksum
To Next Page
Loading...
