To Next Page

To Previous Page

Serial Interface Manual

• TLS2 Monitoring Systems

Part No. 577013-767, Revision H 114

Function Code: 881 Version 1

Function Type: Set Communication Port Data

Command Format: Inquire:

Display: <SOH>S881PPBBBBBPSDTAA <SOH>I881PP

Computer: <SOH>s881PPBBBBBPSDTAA <SOH>i881PP

Notes:

1. PP - Communication Port Number (Decimal 01-05). Inquiry commands

work for all 5 ports (Decimal 01-05). Set commands only work

for the first 3 ports (Decimal 01-03).

Typical Response Message, Display Format:

<SOH>

I88101

22-05-01 15:11

PORT SETTINGS:

COMM 1 : SERIAL

232 SECURITY CODE : 000000

STATUS : DISABLED

BAUD RATE : 9600

PARITY : ODD

STOP BIT : 1

DATA LENGTH : 7

HANDSHAKE : NONE

<ETX>

Typical Response Message, Computer Format:

<SOH>i881PPYYMMDDHHmmPPBBBBBPSDTAA&&CCCC<ETX>

Notes:

1. YYMMDDHHmm - Current Date and Time

2. BBBBB - Baud Rate (Decimal)

3. P - Parity (Decimal; 0=None, 1 or 2)

4. S - Stop Bit (Decimal; 1 or 2)

5. D - Data Bit (Decimal; 7 or 8)

6. T - Pulse or Tone (Decimal; 0=Tone, 1=Pulse)

7. AA - Number of Rings before Answer (Decimal)

8. && - Data Termination Flag

9. CCCC - Message Checksum

Veeder-Root TLS2 Serial Interface Manual

Other manuals for Veeder-Root TLS2