To Next Page

To Previous Page

Serial Interface Manual

• TLS2 Monitoring Systems

Part No. 577013-767, Revision H 127

Function Code: 8C3 Version 4

Function Type: Set TCP/IP Subnet Mask Address

Command Format: Inquire:

Display: <SOH>S8C300aaa.aaa.aaa.aaa <SOH>I8C300

Computer: <SOH>s8C300AAAAAAAA <SOH>i8C300

Notes:

1.aaa.aaa.aaa.aaa - Subnet Mask Address (decimal)

2. AAAAAAAA - Subnet Mask IP Address (ASCII hex, two digits represent each

field)

Typical Response Message, Display Format:

<SOH>

S8C300

JUL 31, 2008 9:02 AM

TCPIP SETUP PARAMETERS

SUBNET MASK ADDRESS: 255.255.255.0

<ETX>

Typical Response Message, Computer Format:

<SOH>s8C300YYMMDDHHmmvAAAAAAAA&&CCCC<ETX>

Notes:

1. YYMMDDHHmm - Current Date and Time

2. v - Valid Data Flag

0 = Not Valid

1 = Valid

3. AAAAAAAA - Subnet Mask (ASCII hex, two digits represent each field)

4. && - Data Termination Flag

5. CCCC - Message Checksum

Veeder-Root TLS2 Serial Interface Manual

Other manuals for Veeder-Root TLS2