Serial Interface Manual
• TLS2 Monitoring Systems
Part No. 577013-767, Revision H 70
Function Code: 56B Version 4
Function Type: Set Autodial Confirmation Flag
Command Format: Inquire:
Display: <SOH>S56BRRf <SOH>I56BRR
Computer: <SOH>s56BRRf <SOH>i56BRR
Typical Response Message, Display Format:
<SOH>
I56B01
22-05-01 15:03
AUTODIAL CONFIRMATION
RCVR AUTODIAL CONFIRMATION
1 DISABLED
<ETX>
Typical Response Message, Computer Format:
<SOH>i56BRRYYMMDDHHmmRRf&&CCCC<ETX>
Notes:
1. YYMMDDHHmm - Current Date and Time
2. RR - Receiver Number (Decimal, 01 only)
3. f - Autodial Confirmation Flag
0=Disabled
1=Enabled
4. && - Data Termination Flag
5. CCCC - Message Checksum
To Next Page
Loading...
