Vega EL 11 - Type Plate

16 Capacitive electrodes EL 4 … 20 mA - compact
ser. no. 10612892
Product description
1.6 Type plate
Before mounting and electrical connection
please check if you use the suitable instrument.
Therefore note the type plate which is located
as follows:
1 Master data of the order no.
2 Ex-certification number
Explosion protection version - note the
information and regulations of the certificate
3 Data of the electronics / Approvals
4 No. of the order confirmation /Pos.-no.
5 Number of the electrode type
6 Serial number
7 Test mark when used as part of an overfill
protection for vessels storing water
endangering liquids - note the information
and regulations in the general type approval
8 Manufacturing year
9 Number of the test authority
Type plate
The type plate contains important data required
for mounting and connection. The configuration
and components of the type plate are hence
explained in the following example.
Configuration of the type plate (example)
Order code
Detailled information on the order you will find
in the “Product Information Capacitive“ or in the
“VEGA-Pricelist“.
6
VEGA
®
EL 11
type EL11EXO.XGBVSTXXVKXX
see PTB Nr. EX-98.E.2085 EEx ia IIC T6 0032
PTB 98 ATEX 2086 II 1/2G EEx ia IIC T6
techn. data see document. / certificates 1998
protection: IP 66/67 Insp.
length: 400mm VVO: 02
Ord. no. 123456/000
3
1
4
2
®
D-77757 Schiltach
5
Z-65.13.XXX
7
9
8