Vega MINITRAC 31 User Manual

54
6Setupwiththedisplayandadjustmentmodule
MINITRAC 31 • Foundation Fieldbus
41782-EN-211203
Callourservicedepartmentifyouhavemodiedandforgottenthe
PIN.
6.5.2 Display
In the main menu point " Display", the individual submenu points
shouldbeselectedoneaftertheotherandprovidedwiththecorrect
parameters to ensure the optimum adjustment of the display. The
procedureisdescribedinthefollowing.
This menu item enables the setting of the requested national lan-
guage.
In delivery status, the sensor is set to the ordered national language.
Ifnolanguageispreset,youwillbeaskedduringsetup.
With this parameter you can change the indication of the display.
Youcanchooseifthedisplayshouldshowtheactualpulserateorthe
electronics temperature.
6.5.3 Diagnostics
In this menu item, you can enquire the status of your sensor. In normal
operation, the sensor displays the message " OK". In case of fault,
youwillndthecorrespondingfaultcodehere.
The peak value function holds the max. and min. values during opera-
tion.
•
Pulserates-min./max.
•
Temperature-min./max./actually
Here, you can retrieve the adjustment value of the sensor. This is the
percentagevalueofthemax.pulserateatwhichthesensorswitches
over.
Menu language
Displayed value
Device status
Peak value indicator
Adjustment data

Vega MINITRAC 31 Specifications

General

Brand	Vega
Model	MINITRAC 31
Category	Accessories
Language	English