Vega MINITRAC 31 - 7.2 Parameter adjustment with PACTware; 7.3 Saving the parameterisation data

64
7SetupwithPACTware
MINITRAC 31 • Foundation Fieldbus
41782-EN-211203
Fig. 23: Example of a DTM view
All device DTMs are available as a free-of-charge standard version
and as a full version that must be purchased. In the standard version,
all functions for complete setup are already included. An assistant for
simpleprojectcongurationsimpliestheadjustmentconsiderably.
Saving/printingtheprojectaswellasimport/exportfunctionsarealso
part of the standard version.
In the full version there is also an extended print function for complete
projectdocumentationaswellasasavefunctionformeasuredvalue
and echo curves. In addition, there is a tank calculation program as
wellasamultiviewerfordisplayandanalysisofthesavedmeasured
value and echo curves.
Thestandardversionisavailableasadownloadunder
www.vega.com/downloads and " Software". The full version is avail-
able on CD from the agency serving you.
7.3 Saving the parameterisation data
We recommend documenting or saving the parameterisation data via
PACTware.Thatwaythedataareavailableformultipleuseorservice
purposes.
Standard/Full version