Vega VEGAFLEX 81 - Page 8

8
3 Product description
VEGAFLEX 81 • Modbus and Levelmaster protocol
42283-EN-140430
•
Scan the Data Matrix code on the type label of the instrument or
•
Enter the serial number manually in the app
Theinstrumentcontainstwodierentelectronicsinitshousingcham-
bers:
•
The Modbus electronics for power supply and communication with
the Modbus-RTU
•
The sensor electronics for the actual measuring tasks
2
1
Fig. 2: Position of Modbus and sensor electronics
1 Modbus electronics
2 Sensor electronics
This operating instructions manual applies to the following instrument
versions:
•
Hardware from 1.0.0
•
Software from 1.0.0
•
OnlyforinstrumentversionswithoutSILqualication
This electronics version can be determined via the product code on
the type label as well as on the electronics.
•
Standard electronics: Type FX80HK.-
The scope of delivery encompasses:
•
Sensor
•
Documentation
– this operating instructions manual
– Testcerticatemeasuringaccuracy(optional)
– Operating instructions manual "Display and adjustment mod-
ule" (optional)
– Supplementary instructions "GSM/GPRSradiomodule"
(optional)
– Supplementary instructions manual "Heating for display and
adjustment module" (optional)
– Supplementary instructions manual "Plug connector for con-
tinuously measuring sensors" (optional)
– Ex-specic"Safety instructions" (with Ex versions)
– ifnecessary,furthercerticates
Electronics design
Scope of this operating
instructions manual
Versions
Scope of delivery