杭州威狐智能科技有限公司
Hangzhou VeloFox Intelligent Technology Co,. Ltd.
文件编号
版本号
1.01
第16 页/共 31页
5.2 Definition of button operation
Operation
Type
Description
Short press
Press the button and soon released, while the button is released,the function
activated accordingly
Long press
Press the button and hold, when the hold time exceeds the setting time(generally
2 seconds), the function activated accordingly.
6 Basic function operation
6.1 Turn on/off the display
To turn on, long press button until boot logo interface appears and shortly enters the basic
interface. To turn off, long press button until display is turned off. If the rider does not perform
any operation on the display within set shutdown time, while speed is 0, and current is less than 1A,
then the display will be turned off automatically. Set shutdown time is self-defined by user.
6.2 Assist level switch
During normal working state，short press 、 buttons to switch assist level, and change assist
mode
* Power display has two default modes, English gear and digital gear; You can specify the
requirements in the order, or modify and select by yourself through the advanced Settings and auxiliary
tools of the instrument 。
Power assist display modes as shown below：
Digital gear: 0-5 levels
English gear：
To Next Page
Loading...
Need help?
General
