杭州威狐智能科技有限公司
Hangzhou VeloFox Intelligent Technology Co,. Ltd.
文件编号
版本号
1.01
第18 页/共 31页
intensity and controls the turning on/off of the lights. The icon on the top right corner of the
basic interface indicates automatic lights-on state.
When automatic lights-on/off function fails, long press button to manually turn on the front
light, a light icon on top left corner of screen will appear indicating light-on status. Long press
button to manually turn the lights off.
Automatic lights-on/off function is disabled , after manually turn off the headlight. Re-start display
to enable automatic lights-on/off function.
When headlights are on, screen brightness will be lowered to preset brightness level.
6.5 Maintenance reminder
Display supports maintenance reminder function, when this function is enabled, the display will
remind the user to give ebike a maintenance check once the total mileage reached a preset value.
maintenance reminder function can be turned on/off in the setting interface and is turned on by
default. The factory default reminding mileage is 5000km which is not modifiable by users, that is,
display will remind the user to give a maintenance check once the total mileage reached 5000km.
To Next Page
Loading...
Need help?
General
