杭州威狐智能科技有限公司
Hangzhou VeloFox Intelligent Technology Co,. Ltd.
文件编号
版本号
1.01
第27 页/共 31页
9. Data clearance
Data clearance is aimed at the removal of data information such as subtotal mileage TRIP,
average speed, and maximum speed. 10s after display is turned on when display is at function
interface, long press M button to show data clearance window, and short press 、 button to
select accordingly. To remove the pop-up clearance window, long press M button or remain no
operation for 30s.
After clearance, the subtotal mileage TRIP is 0, average speed, and max speed is 0. ODO
information can’t be cleaned manually on the display, professional service tools are required.
10.Error information
Display can warn bike faults. When faults are detected, error code will be shown on the interface
and blink at 1Hz. When error code is shown, button functions will not be affected, meaning interfaces
can be shown normally by pressing buttons. If no button operation after 5s, the display will return to
the error code interface.
Error code interface as shown below:
To Next Page
Loading...
Need help?
General
