杭州威狐智能科技有限公司
Hangzhou VeloFox Intelligent Technology Co,. Ltd.
文件编号
版本号
1.01
第8 页/共 31页
② Customization of boot interface and UI
③ Unit: Km/Miles, Language: English/German
④ Display key riding data, speed, mileage, battery info, etc.
⑤ Statistical function for power assist mode
⑥ Walk assist function
⑦ Error code indication
⑧ Parameters setting and advanced setting
⑨ Range and battery indication（*available if BMS provides necessary info）
⑩ Percentage Analysis of total power output shared between engine and rider (*available if torque
sensor provides necessary info)
○
11
Health info statistics（*available if connected to external bluetooth device）
○
12
*Optional: Bluetooth function, for wireless connection for data transmission
○
13
*Optional: Service reminder function
○
14
*Optional：Auto headlight on/off function
○
15
*Optional：Real-Time Clock, for a current time indication
3. Installation
① Display locking clip includes two handle bar sizes, size A Φ31.8mm，B Φ25.4mm. Please include
the requested locking clip size in the purchase order.
Installing DM05 display: Adjust display to a position easy to operate, using M3*10 hex set to screws
and tighten. Tightening torque: 0.8N.m
*Note: Damage caused by excessive torque is not covered by the warranty.
② Place remote button on the left side of horizontal tube, for more remote button models, please refer
to Velofox product catalog.
③ Connect the 5 pin plug to the docking plug of the controller
To Next Page
