杭州威狐智能科技有限公司
Hangzhou VeloFox Intelligent Technology Co,. Ltd.
文件编号
版本号
1.01
第23 页/共 31页
Controller
info
Controller
information
read only According
to
communicat
ion protocol
8. Advanced setting functions
*Warning
The advanced setting function is based on specific protocol content, allowing to modify and set
the controller and system parameter through display side. This feature is only available to specific
groups of people, such as bike manufacturers, dealers and other entities with professional technical
capabilities. Debugging and maintenance are allowed through advanced setting functions. In case of
improper parameter setting or other setting problems, the whole system will work improperly or even
have failure problems. Please be cautious about whom to open this feature to.
Advanced settings require a specific password, if you need to use this feature, please communicate
with our company sales and technical support team to confirm compatibility with your current
hardware version. In the meantime, please confirm with our sales and technical support team for
adequate maintenance capacity, before obtaining the password.
Advanced setting operation instructions
After selecting the advanced setting in the first-level menu, short press M button to enter the
login password. Short press M button to select the corresponding password digit in the 4-digit
password field. The selected password digits will be highlighted with a white background. Short
press 、 to edit password value, and short press M button again to confirm the input. The
password input interface is as follows:
To Next Page
Loading...
Need help?
General
