Vendo VUE 30 Manual

T-2
04/2005
PARTS RETURN PROCEDURES
1. All parts returned must be accompanied by a material return tags (P/N 1122825) Tag must clearly
state the reason for the return and the Return Goods Authorization Number received from your Vendo
Customer Service Rep at 1-800-344-7216. (Return tags are available from our parts department upon
request).
2.
All parts should be properly wrapped and packed securely to avoid further damage.
3. To replace an inoperative part, please use the following instructions
4. Complete the return tag making sure to fill in ALL requested information to ensure prompt processing.
Keep top (white) copy for your records. Attach tag to inoperative part and send it by the most inexpensive
method of transportation (Federal Express Ground or Overnight Transportation) To: SandenV
endo
America, Inc., 10710 Sanden Drive, Dallas, Texas 75238.
5. Be sure to check (
R) the box marked “credit” and to fill in the invoice number covering the part sent to
you or check the box marked “replace with like part”.
6.
If the box is marked for replace with like part, a like part will be shipped at no charge if our inspection
shows that the inoperative part became defective during the warranty period.
7.
If the box is marked for credit, a credit will be issued to cancel the invoice on which the replacement part
was shipped. This credit will include any applicable prepaid transportation charges. To receive credit the
inoperative part must be returned within 30 days from the date the replacement was shipped.
8.
Vendo does not issue cash credit for the return of any part or accessory.
REFRIGERATION UNIT RETURN PROCEDURE
1. All refrigeration units returned must be accompanied by a material return tag (P/N 1122826). Tag must
clearly state the reason for the return and the Return Goods Authorization Number received from your
Vendo Customer Service Rep at 1-800-344-7216. (Return tags are available from our parts department
upon request).
2.
All refrigeration units should be properly wrapped and packed securely to avoid further damage.
3. To replace an inoperative part, please use the following instructions.
4. Complete the return tag making sure to fill in ALL requested information to ensure prompt processing.
Keep top (white) copy for your records. Attach tag to inoperative part and send it by the most inexpensive
method of transportation (Federal Express Ground or Overnight Transportation) To: SandenVendo
America, Inc., 10710 Sanden Drive, Dallas, Texas 75238.
5. Be sure to check (
R) the box marked “credit” and to fill in the invoice number covering the part sent to
you or check the box marked “replace with like part”.
6.
If the box is marked for replace with like part, a like part will be shipped at no charge if our inspection
shows that the inoperative part became defective during the warranty period.
7.
If the box is marked for credit, a credit will be issued to cancel the invoice on which the replacement part
was shipped. This credit will include any applicable prepaid transportation charges. To receive credit the
inoperative part must be returned within 30 days from the date the replacement was shipped.
8.
Vendo does not issue cash credit for the return of any refrigeration unit.
*Canadian and International customers please contact your Customer Service Representative
for return instructions

Vendo VUE 30 Specifications

General

Brand	Vendo
Model	VUE 30
Category	Vending machines
Language	English