Network Camera User’s Guide
37/83
FTP Client: Setup the Network Camera as a client site and configure
Server site in order to upload images to server
When alarm was enabled, user can send the captured images to the pre-set FTP server.
Entering server name and your login username and password, you will be able to upload
those previous captured image to the FTP server. You can also send data to the server
according to different situation such as by event or by period.
FTP server name:
Type the FTP server name to upload still images, or the IP address of the FTP server.
User name:
Type the user name for the FTP server.
Password:
Type the password for the FTP server.
Remote path:
To Next Page
Loading...
Need help?
General