Veo Infra-Red User Manual

Network Camera User’s Guide
39/83
SMTP: Setup Mail configuration
When alarm was enabled, user can setup the mail to send the captured images to the
pre-set mail address.
You may setup SMTP mail parameters for future event-message receiving such as
motion detected or sensor activated.
SMTP server name:
Type the SMTP server name up to 64 characters, or the IP address of the SMTP server.
User name:
Type the user name for the SMTP server.
Password:
Type the password for the SMTP server.

Veo Infra-Red Specifications

General

Brand	Veo
Model	Infra-Red
Category	Digital Camera
Language	English