EasyManua.ls Logo

Veo Infra-Red - Appendix D: Technical Specifications; IR IP-30 M Model Specifications; IR IP-50 M Model Specifications

Veo Infra-Red
83 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Network Camera Users Guide
75/83
Appendix D: Specifications
Model IR IP-30M IR IP-50M
Horizontal Resolution 380 TV Lines
Image Device 1 / 3” Color CCD image sensor
Scanning System NTSC : 525 lines 2 : 1 interlace / PAL : 625 lines 2 : 1 interlace
Scanning Frequency
NTSC : 15,734 Hz (H) , 60 Hz (V) /
PAL : 15,625 Hz (H) , 50 Hz (V)
Effective Pixels
NTSC:537(H) × 505(V) /
PAL:537(H) × 597(V)
Electronic Shutter
NTSC : 1 / 60 – 100,000 sec / PAL : 1 / 50 – 100,000 sec
Power Supply
85 ~260V AC
Sensitivity
0.05 Lux,0Lux at IR on
Signal to Noise More than 48 dB
Gain Control AGC
White Balance Auto 2000°K ~ 10000°K
BLC
Auto
Gamma Correction
0.45
SYNC System
Internal
Lens 6mm Standard 25mm
Video Output Composite 1.0 Vp-p at 75 ohm
IR LED High-light led × 12pcs
High-light led × 12pcs
With condensing lens
IR View Angle
View angle : 80° , Beam spread : 20° / per LED
IR Wavelength
850 mm
IR Distance 25 ~ 30 M 50 M
IR Status
Under 10 Lux by CDS auto control
LED Life
More than 20,000 hours
Protection Class
IP-66 classification
Power Consumption IRon:280mA,IROFF:100mA IRon:280mA,IROFF:100mA
Construction
Aluminum with sunshield IP66 weatherproof
Temperature
Operating : -20 to 50 , Storage : -30 to 60
Dimensions 95 (Φ) × 200 (L) 95 (Φ) × 200 (L)
Wight 1.32 Kgs 1.32 Kgs
IP
Codec
JPEG, 3 levels