Network Camera User’s Guide
46/83
Firmware upgrade:
The Network Camera supports firmware upgrades (the software that controls the
operation in the Network Camera). We would supply the latest firmware version for
upgrade. Please contact your dealer for the latest version.
Download the latest firmware file from our website. Unzip this firmware file to binary file
and store it into your PC. The file name should be RZ.BIN or similar for the Network
Camera. Then follow the steps as bellows carefully:
1. Close all other application programs which are not necessary for firmware update.
2. Disable Motion Detection function.
3. Disable Camera Tour function.
4. Set the video resolution to 176 x 144 or smaller.
5. Set the frame rate to 1 fps.
6. Select “Firmware update”
7. The Firmware Upgrade menu will appear:
8. Select the Firmware binary file. (It must be make sure that the Firmware only apply to
To Next Page
Loading...
Need help?
General